Troubleshooting Tips For Landscape Lighting Repair

When a landscape lighting fixture stops working, it may be because the light bulb is burned out. However, it can also be due to problems with wiring and connections that are buried underground.

Landscape Lighting

The ground is a hostile environment for wire connections, so they need to be durable and resist oxidation. Using a waterproof connection system is the best way to prevent corrosion. For professional help, contact Elegant Custom Images Inc.

If your landscape lighting isn’t shining brightly or looks dated, you may need to replace the fixtures. The good news is that your new light bulbs should provide years of use and beauty if you choose quality products and get them installed by experienced professionals.

When a light fixture starts to fail, the cause can be as simple as the bulb or as complicated as a broken internal component. For example, the fixture could have a bad gasket that lets water inside and causes corrosion. It can also have a bad socket that doesn’t hold the bulb or doesn’t provide enough power to make the bulb glow.

In some cases, the problem is actually an overloaded system and not a broken fixture. If the total wattage of all the lights exceeds the transformer’s capacity, it will trip the circuit breaker and the lights won’t work. In this case, it would be wise to consider upgrading your lighting to a higher wattage system and reduce the load on the transformer.

A good landscape lighting repair company will inspect the fixtures for any visible damage. They can also test the light sockets with a voltage meter to ensure they’re getting proper power. They’ll also ensure the timer settings are correct.

Leaking fixtures are another common problem in landscape lighting. If the leaking is occurring in more than one fixture, it could indicate that the fixtures aren’t designed to handle moisture. Often times, the problem is caused by composite (plastic) fixtures that aren’t built to last. These fixtures can become brittle and warp over time, especially when the weather is hot and dry.

If a fixture isn’t working, it could be that the wires aren’t properly connected or are showing signs of wear and tear. This is particularly true of the pier point connections in landscape lighting systems. These connectors aren’t designed to be submerged in the ground, so they will eventually corrode and stop functioning. The best solution is to switch to watertight, heat-shrink connectors that will protect the wires from being exposed in the ground.


A well-designed landscape lighting system can elevate your outdoor space in ways that are hard to match. But like anything else, it requires regular maintenance to function correctly. In the event your lights aren’t functioning as they should, a few basic troubleshooting techniques can help you figure out what’s going on.

A common issue with landscape lighting is that the bulbs will burn out, but this could also be a sign of a bad ground stake or a loose connection within the fixture. If this is the case, it’s best to contact a professional to handle any landscape light repair.

If you’re noticing issues with your low voltage landscape lights, it’s important to check the power cable first. Look for any visible damage, rust or corrosion on the wire-nut connector and clean it off with pliers before re-connecting it. You should also consider using a digital voltage meter to test each light for proper operation. Halogen lights should be getting 10.5 to 12 volts to operate properly.

The most common problem that can occur with a landscape lighting set-up is a faulty connection or wire. This is especially true for buried wiring. When a low-voltage wire is buried underground, moisture can erode the connection points and cause it to fail. It is essential to use waterproof connections designed for this purpose and install them with care.

Wire problems in outdoor lighting systems can also be a result of sub-par products, improper installation, and wear and tear. It’s important to choose a solution like tin-coated landscape lighting wire that is designed to resist corrosion and other environmental hazards.

Another common problem is a circuit breaker that continuously trips when your lights are on. This is a sign of a short in the wiring system and should be addressed immediately. While it may be tempting to use tape or other quick DIY solutions, this can lead to further problems and a dangerous situation for you and your family. A professional electrician will be able to diagnose the issue and make the necessary repairs.


The transformer is the power center of your landscape lighting system, delivering a safe voltage to each fixture through wire connections. If these connections get loose, it can cause your lights to shut off or, in the worst cases, spark and generate heat that melts the connection and can, in extreme instances, create fires. In order to avoid these issues, it’s a good idea to have the connections within your transformer physically tested and tightened as part of regular maintenance.

While most issues with your landscape lighting will manifest themselves as lights that don’t turn on, sometimes the problem can be more difficult to detect. In these situations, you may notice signs of smoke or heat if the prongs inside a socket are touching one another (and then it becomes an emergency situation that should be handled by a professional).

When working with landscape lighting, it’s always best to work with professionals. They can perform a variety of tests to determine the source of the problem and recommend the best course of action. This can range from simple tests that can be performed at the transformer to more involved concerns that require digging up buried wiring and dismantling light fixtures.

The simplest way to check if a socket is bad is to plug in a different bulb. If the new bulb doesn’t kick on, then there isn’t any electricity flowing to the fixture. Another test that can be preformed is to use a voltage meter to see if there are any problems with the incoming and outgoing wires.

In some cases, the best solution is to replace your entire lighting system. Lighting technology has come a long way in recent years, and older systems are often not as reliable as what is currently available on the market. A lighting specialist can help you choose and install new fixtures that will better meet your needs and be more resistant to damage. They can also assist with the design process and provide recommendations for an efficient and effective layout. In many cases, this will reduce energy consumption and save you money.


Landscape lighting is a beautiful way to highlight your outdoor spaces at night. It also adds security by illuminating the area around your home. But just like any other electrical fixture, it can experience problems that require a landscape lighting repair professional.

One of the most common problems with landscape lighting is that a light won’t turn on. This may be due to a burned out bulb, but it’s more likely caused by a faulty socket. To check if the socket is still good, you can use a voltage meter. If the voltage is still good, the problem is most likely caused by moisture or a poor connection.

If the switch is not working, it’s likely because it has become corroded or worn out. If this is the case, simply replace the switch. You can do this by removing the old switch with pliers and splicing together the two ends of the wire using a wire-nut connector.

Another possible problem with a landscape lighting system is that the lights are not properly positioned or oriented. This can happen over time as trees and bushes grow or when an older system was not designed with the latest specifications in mind. It is important to regularly assess the position of all your lighting sources to make sure they are not being blocked by bushes, overgrown trees or other objects.

A final problem that can occur is that the wiring is not up to par. If the system was installed with low-quality products, the wiring can decay over time, especially when it is buried underground and exposed to the elements. It is important to use high-quality products that are designed for outdoor landscape lighting in order to avoid these issues.

Landscape lighting is a great addition to any home, but it can be frustrating when it doesn’t work as intended. By following the tips in this article, you can reduce the number of repairs you need to make to your landscape lighting system. Just remember to always hire a licensed and insured landscape lighting professional for any electrical repairs. It is not worth it to try and save a few dollars by doing it yourself and end up putting your family and your property at risk.